Pros and Cons of Cost-Plus vs. Fixed Price Contracts

This course was last revised on September 20, 2022.

Call 1-866-352-9540 for further credit information.

• AIA 1.0
   
• Lorman Education Services is a registered provider of AIA-approved continuing education under Provider Number J2016. This course is approved for 1.0 Learning Unit hour(s). Prerequisite: None, Program Level: Intermediate: Advanced Preparation: None All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.
   
• AK CLE 1.0
   
• Alaska attorneys may receive 1.0 hours of continuing legal education for completing this program. Please contact the Alaska Bar Association or go to www.alaskabar.org for details regarding reciprocity with other states.
   
• AL CLE 1.2
   
• This course or a portion thereof has been approved by the Alabama State Mandatory Continuing Legal Education Commission for a maximum of 1.2 hours credit.
   
• AR CLE 1.0
   
• This course has been approved for 1.0 hours of CLE by the Arkansas CLE Board.
   
• Arizona CLE 1.0
   
• The Arizona State Bar does not pre-approve or pre-certify MCLE programs. However, records of this program and attendance will be maintained by Lorman Education Services for auditing purposes. This activity may qualify for up to 1.0 hours toward your annual CLE requirement for the State Bar of Arizona.
   
• CA MCLE 1.0
   
• Lorman Education Services is a State Bar of California approved MCLE sponsor and this course qualifies for 1.0 CLE hours of participatory credit.
   
• CT CLE 1.0
   
• Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.0 CLE credit(s).
   
• GA CLE 1.0
   
• This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
   
• MO CLE 1.3
   
• This course qualifies for self-study CLE credit in Missouri.
   
• ND CLE 1.25
   
• North Dakota CLE policy does not allow for pre-approval of any self-study courses. This course may qualify for up to 1.25 hours of CLE credit.
   
• NH MCLE 1.2
   
• NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this Ondemand course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 69 Minutes.
   
• NM CLE 1.1
   
• This program has been approved by the New Mexico Minimum Continuing Legal Education Board for 1.1 hours of credit.
   
• NV CLE 1.0
   
• This program has been approved by the Nevada Board of Continuing Legal Education for 1.0 CLE hours.
   
• RI CLE 1.0
   
• This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.0 hours of CLE credit.
   
• VT CLE 1.0
   
• This self-study program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.0 hour(s) of CLE credit. Please note: Attorneys may only claim 12 credits per compliance period in this format. This course is considered "Non-Moderated Programming without Interactivity".
   
• WA CLE 1.25
   
• This program has been approved by the Washington State Board of Continuing Legal Education for 1.25 hours of A/V credit under the Law & Legal Procedure category.
   
• AK ENG 1.0
   
• This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0. *Please check the rules and requirements in your state for compliance.
   
• AL ENG
   
• This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
   
• AR ENG
   
• This Ondemand program is applicable for 1.1 professional development hours.* *Please check the rules and requirements in your state for compliance.
   
• GA ENG
   
• This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.1 professional development hours.* *Please check the rules and requirements in your state for compliance.
   
• IA ENG
   
• This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
   
• ID ENG 1.0
   
• This Ondemand program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.* *Please check the rules and requirements in your state for compliance.
   
• IL ENG 1.0
   
• This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.* *Please check the rules and regulations in your state for compliance.
   
• IN ENG 1.3
   
• This Ondemand program is applicable for 1.3 professional development hours through the Indiana State Board for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
   
• KS ENG 1.0
   
• This program is applicable for 1.0 professional development hours for engineers.* *Please check the rules and regulations in your state for compliance.
   
• KY ENG 1.1
   
• This Ondemand program is applicable for 1.1 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• LA ENG
   
• The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Education Services believes that this course is worth 1.0 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
   
• MD ENG 1.0
   
• Lorman Education Services is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
   
• ME ENG 1.0
   
• This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.* *Please check the rules and requirements in your state for compliance.
   
• MN ENG 1.0
   
• This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
   
• MO ENG 1.5
   
• This ondemand course is applicable for 1.5 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• MS ENG
   
• This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
   
• MT ENG 1.0
   
• This ondemand course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• NC ENG 1.0
   
• This program may qualify for up to 1.0 professional development hour(s) for engineers. Please note: The North Carolina Board of Examiners for Engineers and Surveyors does not require that licensees take their CE from a Board approved Sponsor. The onus is on the licensee to make the determination of whether a course or activity has a purpose or objective which will maintain, improve, or expand the skills and knowledge relevant to the licensee's field of practice.
   
• ND ENG 1.0
   
• The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers. This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
   
• NE ENG
   
• This course is applicable for professional development hours for engineers if the course is continuing engineering education for you..* *Please check the rules and requirements in your state for compliance.
   
• NH ENG 1.0
   
• This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
   
• NJ ENG 1.0
   
• Lorman Education Services is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers. This course is applicable for 1.0 CPC credits for engineers. * *Please check the NJ State rules and requirements for compliance.
   
• NM ENG 1.0
   
• This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• NV ENG 1.0
   
• This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.* *Please check the rules and requirements in your state for compliance.
   
• OH ENG
   
• This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.* *Please check the rules and requirements in your state for compliance
   
• OK ENG
   
• This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• OR ENG
   
• This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
   
• PA ENG 1.3
   
• This program is applicable for 1.3 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.* *Please check the rules and requirements in your state for compliance.
   
• SC ENG 1.0
   
• This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.* *Please check the rules and requirements in your state for compliance.
   
• SD ENG
   
• This course is applicable for professional development hours for engineers in South Dakota.* *Please check the rules and requirements in your state for compliance.
   
• TN ENG
   
• This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• TX ENG
   
• This Ondemand course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• UT ENG
   
• This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• VA ENG 1.0
   
• This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).* *Please check the rules and requirements in your state for compliance.
   
• VT ENG
   
• This course is applicable for professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• WI ENG 1.0
   
• This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.* *The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
   
• WV ENG 1.0
   
• This course is applicable for 1.0 professional development hours for engineers.* *Please check the rules and requirements in your state for compliance.
   
• WY ENG 1.3
   
• This course is applicable for 1.3 professional development hours for Wyoming engineers.* *Please check the rules and requirements in your state for compliance.
   

To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.

• Those applying for AIA and HRCI must view 100% of the program and answer the questions following the program.

This program does NOT qualify, nor meet the National Standard for NASBA accreditation.