Gain an understanding of the rules of sales and use taxation and be aware of potential exceptions and special applications.
This topic will assist contractors and those dealing with contractors an understanding as to who and what is subject to sales and use taxes, including who is responsible for collecting the sales tax or paying the use tax, e.g. who is the ultimate consumer, the differences in taxation between real and personal property, the taxation of repairs, repair services and installation, and the taxation of intangibles such as warranties. Without an understanding of these basic concepts, a contractor may significantly under-bid the cost and profit related to construction projects, or may be subject to additional taxes, penalties and interest upon audit. This program will not only review basic general rules, but will also discuss some exceptions and special applications.
Learning Objectives
- You will be able to describe who is responsible for collecting or paying the sales and use tax.
- You will be able to explain who is subject to the sales and use tax.
- You will be able to identify typical sales and use tax exemptions.
- You will be able to review basic rules of taxation and be aware of potential exceptions and special applications.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Agenda
Who Is Responsible for Collecting or Paying the Sales and Use Tax?
- The Contractor as the Vendor or Retailer
- The Contractor as the Consumer
What Is Subject to Tax?
- Personal Property vs. Real Property
- Repairs and Installation
- Warranty Contracts
- Intangible Property
Tax Exemptions
- Sales for Resale Exemption
- Religious and Charitable Organizations
- Government Entities
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Credits
OnDemand Course
This course was last revised on May 20, 2020.
Call 1-866-352-9540 for further credit information.
- AL CLE 1.4
- This course or a portion thereof has been approved by the Alabama State Mandatory Continuing Legal Education Commission for a maximum of 1.4 hours credit.
- CT CLE 1.0
- Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.0 CLE credit(s).
- GA CLE 1.0
- This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
- RI CLE 1.5
- This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.5 hours of CLE credit.
- AK ENG 1.0
- This Ondemand program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0.
*Please check the rules and requirements in your state for compliance.
- AL ENG
- This Ondemand program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors.*
*Please check the rules and requirements in your state for compliance.
- AR ENG
- This Ondemand program is applicable for 1.3 professional development hours.*
*Please check the rules and requirements in your state for compliance.
- FL ENG 1.6
- This course has been approved for 1.6 PDH by the Florida Board of Professional Engineers in the Areas of Practice.
- GA ENG
- This Ondemand program is applicable through the Georgia State Board of Registration for Professional Engineers.for 1.3 professional development hours.*
*Please check the rules and requirements in your state for compliance.
- IA ENG
- This Ondemand program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.*
- ID ENG 1.5
- This Ondemand program is applicable for 1.5 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.*
*Please check the rules and requirements in your state for compliance.
- IL ENG 1.5
- This program is applicable for 1.5 professional development hours through the Illinois Society for Professional Engineers.*
*Please check the rules and regulations in your state for compliance.
- IN ENG 1.6
- This Ondemand program is applicable for 1.6 professional development hours through the Indiana State Board for Professional Engineers.*
*Please check the rules and requirements in your state for compliance.
- KS ENG 1.0
- This program is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and regulations in your state for compliance.
- KY ENG 1.3
- This Ondemand program is applicable for 1.3 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- LA ENG
- The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Education Services believes that this course is worth 1.5 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
- MD ENG 1.0
- Lorman Education Services is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
- ME ENG 1.0
- This ondemand program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.*
*Please check the rules and requirements in your state for compliance.
- MN ENG 1.0
- This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
- MO ENG 1.5
- This ondemand course is applicable for 1.5 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- MS ENG
- This ondemand course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.*
*Please check the rules and requirements in your state for compliance.
- MT ENG 1.0
- This ondemand course is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- NC ENG 1.5
- Lorman Business Center, LLC. is an approved sponsor of the North Carolina State Board of Examiners for Engineers and Surveyors. This course qualifies for 1.5 professional development hours for engineers.
- ND ENG 1.5
- The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers.
This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
- NE ENG
- This course is applicable for professional development hours for engineers if the course is continuing engineering education for you.*
*Please check the rules and requirements in your state for compliance.
- NH ENG 1.0
- This course is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
- NJ ENG 1.0
- Lorman Education Services is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers.
This course is applicable for 1.0 CPC credits for engineers. *
*Please check the NJ State rules and requirements for compliance.
- NM ENG 1.5
- This course is applicable for 1.5 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- NV ENG 1.0
- This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.*
*Please check the rules and requirements in your state for compliance.
- OH ENG
- This ondemand course is applicable for continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying.*
*Please check the rules and requirements in your state for compliance
- OK ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- OR ENG
- This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
- PA ENG 1.6
- This program is applicable for 1.6 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.*
*Please check the rules and requirements in your state for compliance.
- SC ENG 1.0
- This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.*
*Please check the rules and requirements in your state for compliance.
- SD ENG
- This course is applicable for professional development hours for engineers in South Dakota.*
*Please check the rules and requirements in your state for compliance.
- TN ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- TX ENG
- This Ondemand course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- UT ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- VA ENG 1.5
- This program is applicable for 1.5 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).*
*Please check the rules and requirements in your state for compliance.
- VT ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- WI ENG 1.5
- This course is applicable for a maximum of 1.5 hours toward the PDH requirement for engineers.*
*The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
- WV ENG 1.0
- This course is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- WY ENG 1.6
- This course is applicable for 1.6 professional development hours for Wyoming engineers.*
*Please check the rules and requirements in your state for compliance.
To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.
This program does NOT qualify, nor meet the National Standard for NASBA accreditation.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Faculty
Gary Thorup
Dentons Durham Jones Pinegar P.C.
- Shareholder at Dentons Durham Jones Pinegar P.C.
- Practice is primarily focused on state and local tax matters, government affairs, administrative law, but also includes federal tax controversies and nonprofit/tax exempt organizations
- Utah Attorney General – Ass’t. Attorney General (Tax Section)(1981-86), Chief, Tax Section (1982-86)
- Utah State Tax Commission – Chief General Counsel (1983-86)
- Utah State Bar Association – chair, Tax Section
- National Association of State Bar Tax Sections – member and past chair of the Executive Committee
- Recognized by Utah Legal Elite (Tax)
- Recognized by Mountain State’s list of Super Lawyers (Tax)
- Speaker/presenter/moderator at numerous national and Utah-based seminars and conferences on various SALT topics
- LL.M. degree, NYU School of Law; J.D. degree, University of Utah College of Law; B.A. degree in political science, magna cum laude, University of Utah
- Can be contacted at 801-415-3000 or [email protected]
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
All of your training, right here at Lorman.
Pay once and get a full year of unlimited training in any format, any time!
- OnDemand Courses
- Live Webinars
- MP3 Downloads
- Course Manuals
- Executive Reports
- White Papers and Articles
Additional benefits include:
- State Specific Credit Tracker
- All-Access Pass Course Concierge
Questions? Call 877-296-2169 to speak with a real person.
Access to all training products for one year
$699/year
Unlimited Lorman Training
With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!
Easy Registrations
Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.
Invest in Yourself
You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.
