ADA Standards are complex, understand the most compliant ways to utilize construction tolerances.
Dimensional tolerances as well as construction and manufacturing tolerances are included within the Americans with Disabilities Act (ADA) and its implementing regulations and standards. The tolerances are frequently misunderstood and misapplied. Knowing when and how the tolerances apply is critical for an accurate ADA evaluation of disabled access issues both on a particular site as well as in litigation. U.S. Department of Justice (DOJ) documents have provided some limited help in interpreting and applying tolerances under the ADA. Federal courts have recognized the significance of tolerances in the context of ADA access litigation and have criticized expert witness opinions for failure to consider construction tolerances. Understanding both dimensional tolerances as well as construction and manufacturing tolerances is critical to evaluating whether or not a particular component complies with accessibility requirements of the ADA. In this topic, you will develop an understanding of dimensional tolerances, construction and manufacturing tolerances, as well as the express tolerances included in the ADA. The sources available to identify conventional industry tolerances will be reviewed. Measurement tools to be used and methods of measurement, as well as applying tolerances to measurements will also be reviewed.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Agenda
Tolerances
- Dimensional Tolerances
- Construction and Manufacturing Tolerances
- ADA Express Tolerances
Construction Tolerances
- Conventional Industry Tolerances
- When Applied
- Determining Conventional Industry Tolerances for Specific Components
- Sources to Identify Conventional Industry Tolerances
Acceptable Measurements
- Measurement Tools
- Measurement Methods
- Applying Construction Tolerances to Measurements
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Credits
OnDemand Course
This course was last revised on September 25, 2024.
Call 1-866-352-9540 for further credit information.
- AR CLE 1.0
- This course has been approved for 1.0 hours of CLE by the Arkansas CLE Board.
- Arizona CLE 1.0
- The Arizona State Bar does not pre-approve or pre-certify MCLE programs. However, records of this program and attendance will be maintained by Lorman Education Services for auditing purposes. This activity may qualify for up to 1.0 hours toward your annual CLE requirement for the State Bar of Arizona.
- CA MCLE 1.0
- Lorman Education Services is a State Bar of California approved MCLE sponsor and this course qualifies for 1.0 CLE hours of participatory credit.
- CT CLE 1.0
- Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.0 CLE credit(s).
- GA CLE 1.0
- This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
- HI CLE 1.0
- This program was approved by the Hawaii State Board of Continuing Legal Education for 1.0 CLE credit hours.
- MO CLE 1.2
- This course qualifies for self-study CLE credit in Missouri.
- NH MCLE 1.0
- NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this Ondemand course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 62 Minutes.
- NJ CLE 1.3
- This program has been approved by the Board on Continuing Legal Education of the Supreme Court of New Jersey for 1.3 hours of total CLE credit.
- PA CLE 1.0
- This Distance Learning program has been approved by the Pennsylvania Continuing Legal Education Board for 1.0 hours of substantive law, practice and procedure CLE credit.
- RI CLE 1.0
- This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.0 hours of CLE credit.
- VT CLE 1.0
- This self-study program has been approved by the Mandatory Continuing Legal Education Board of Vermont for 1.0 hour(s) of CLE credit. Please note: Attorneys may only claim 12 credits per compliance period in this format. This course is considered "Non-Moderated Programming without Interactivity".
- WI CLE 1.0
- This program qualifies for 1.0 hour(s) of ondemand CLE through the WI Board of Bar Examiners.
- WV MCLE 1.2
- This program has been approved by the West Virginia State Bar MCLE Commission for 1.2 MCLE hours.
- ICC 0.1
- Lorman Education Services is an International Code Council Preferred Provider. This event is approved for 0.1 CEU's through ICC.
To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.
This program does NOT qualify, nor meet the National Standard for NASBA accreditation.
MP3 Download
- Arizona CLE 1.0
- CA MCLE 1.0
- CT CLE 1.0
- HI CLE 1.0
- NJ CLE 1.3
- NY CLE 1.0 including Areas of Professional Practice 1
- VT CLE 1.0
- WV MCLE 1.3
This program does NOT qualify, nor meet the National Standard for NASBA accreditation.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Faculty
Cris C. Vaughan, CASp, ADAC, PA
Vaughan & Associates Law Office, APC
- Principal owner of Vaughan & Associates Law Office, APC; principal owner of ADA Consultant Services; co-owner ADA Today, LLC
- Practice focuses on protecting and defending both private businesses and public entities in Americans with Disabilities Act (ADA) litigation matters as well as related state and federal laws regarding accessibility
- Has performed more than five hundred (500) accessibility evaluations of both public accommodations and government facilities
- Frequent speaker and has written numerous publications on a wide range of ADA issues and access compliance
- Certified Accessibility Specialist (CASp) and Certified ADA Coordinator (ADAC)
- J.D. degree, University of the Pacific McGeorge School of Law; B.A. degree, with honors, Western Oregon University
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
All of your training, right here at Lorman.
Pay once and get a full year of unlimited training in any format, any time!
- OnDemand Courses
- Live Webinars
- MP3 Downloads
- Course Manuals
- Executive Reports
- White Papers and Articles
Additional benefits include:
- State Specific Credit Tracker
- All-Access Pass Course Concierge
Questions? Call 877-296-2169 to speak with a real person.
Access to all training products for one year
$699/year
Unlimited Lorman Training
With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!
Easy Registrations
Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.
Invest in Yourself
You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.
