Avoid errors that cost you money or your reputation by understanding the factors that lead to floor covering failure and how to prevent them.
Moisture passing from or through concrete floor slabs is responsible for millions of dollars lost to floor covering and coating system failures every year. Responsible parties often share the cost of failures, which are typically far greater than the initial cost of floor system installation. Cost is often measured in the dollars required to remedy a failure, but it can also be a cost to reputation and the loss of future work. Understanding the factors that lead to failure and acting on them is the most effective means of prevention. The topics presented in this seminar will offer an understanding of the factors that affect concrete moisture emission. With an increased awareness of these factors, the attendee will be better prepared to prevent failures through a more thorough understanding of concrete floor slab system components. Moisture related floor covering system failures are preventable and should never occur. The information presented will beneficially assist the attendee to become part of the cure and prevention of failure, rather than a defendant in litigation.
Learning Objectives
- You will be able to define cause and effect of concrete moisture emission.
- You will be able to describe the difference between concrete curing and drying.
- You will be able to identify conflicts between Section 3 and Section 9 of project manuals.
- You will be able to review factors that affect concrete drying and moisture vapor emission.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Agenda
| Concrete Moisture Emission and Floor Covering Systems | |
|
|
| Concrete Drying Versus Curing | |
|
|
| Sub-Slab Vapor Retarders | |
|
|
| Concrete Finishing | |
|
|
| Preventative Design and Remediation If Needed | |
|
|
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Credits
Live Webinar Registration
- AIA (Pending)
- AK ENG 1.0
- This program is applicable for professional development hours through the Alaska State Board of Registration for Architects, Engineers and Land Surveyors. Professional development hours: 1.0.
- AL ENG
- This program is applicable for professional development hours through the Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors. Please note: The Alabama Board of Licensure for Professional Engineers and Professional Land Surveyors does not preapprove courses.
- FL ENG 1.3
- This course has been approved for 1.3 PDHs by the Florida Board of Professional Engineers in the Areas of Practice.
- GA ENG
- This program is applicable for professional development hours through the Georgia State Board of Registration for Professional Engineers.
- IA ENG
- This program is applicable for professional development hours for engineers. Please refer to Chapter 3, 193C IAC.
- ID ENG 1.0
- This program is applicable for 1.0 professional development hours through the Idaho Board of Professional Engineers and Professional Land Surveyors.
- IL ENG 1.0
- This program is applicable for 1.0 professional development hours through the Illinois Society for Professional Engineers.*
*Please check the rules and regulations in your state for compliance.
- IN ENG 1.3
- This program is applicable for 1.3 professional development hours through the Indiana State Board for Professional Engineers.
- KS ENG 1.0
- This program is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and regulations in your state for compliance.
- LA ENG
- The Louisiana Professional Engineering and Land Surveying Board (LAPELS) no longer approves providers or courses. Lorman Business Center, LLC. feels that this course is worth 1.0 PDH(s). According to LAPELS' rules, It will be the responsibility of the licensee to determine if a Course/Activity offered by an unapproved sponsor/provider is an Acceptable Activity.
- MD ENG 1.0
- Lorman Business Center, LLC. is a board approved sponsor with the Maryland Board of Professional Engineers. This course qualifies for 1.0 professional development hours.
- ME ENG 1.0
- This program is applicable for a maximum of 1.0 hours toward the annual PDH requirement. Please note: The State of Maine Professional Engineers Registration Board does not pre-approve courses for professional development credit.
- MI ENG 1.0
- This course is applicable for 1.0 professional development hours for engineers in Michigan through the Michigan Department of Licensing and Regulatory Affairs Corporations, Securities & Commercial Licensing Bureau.*
*Please check the department rules and requirements for compliance.
- MN ENG 1.0
- This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers. Please note: The Minnesota State Board of Registration for Engineers has final authority on the acceptance of individual courses.
- MO ENG 1.0
- This course is applicable for 1.0 PDH's through the Missouri Board for Professional Engineers.
- MS ENG
- This course is applicable for professional development hours through the Mississippi State Board of Registration for Professional Engineers.
- ND ENG 1.0
- The North Dakota State Board of Registration for Engineers and Land Surveyors does not pre-approve courses or providers.
This course may be applicable for professional development hours in your state. Please check your rules and requirements for compliance.
- NE ENG
- This course is applicable for professional development hours for engineers if the course is continuing engineering education for you.*
*Please check the rules and requirements in your state for compliance.
- NH ENG 1.0
- This course is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance. The New Hampshire Board of Engineers has final authority on granting approval.
- NJ ENG 1.0
- Lorman Business Center, LLC. is authorized as a provider to offer courses through the New Jersey Board of Professional Engineers.
This course is applicable for 1.0 CPC credits for engineers. *
*Please check the NJ State rules and requirements for compliance.
- NM ENG 1.0
- This course is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- NV ENG 1.0
- This course is applicable for 1.0 professional development hours through the Nevada State Board of Engineering and Land Surveyors.*
*Please check the rules and requirements in your state for compliance.
- NY ENG 1.0
- Lorman Education Services is an approved provider through the AIA/CES. For courses or educational activities to be used towards New York's continuing education requirements, the course must be in an acceptable subject area and must also be in an approved format. Please refer to the rules of the State Board for Professional Engineering and Land Surveying in New York for further details here: http://www.op.nysed.gov/prof/pels/peceques.htm.
Live Webinar Course Length: 1.0 hour(s).
- OH ENG
- This course is applicable for ethics continuing education credit for engineers through the Ohio State Board of Licensure for Professional Engineers provided it is a relevant managerial, ethical or technical topic relevant to the practice of engineering or surveying
- OK ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- OR ENG
- This course is applicable toward engineering continuing education hours in Oregon, please refer to your rules and laws.
- PA ENG 1.3
- This program is applicable for 1.3 PDHs for engineers through the Pennsylvania State Board of Professional Engineers, Land Surveyors and Geologists.*
*Please check the rules and requirements in your state for compliance.
- SC ENG 1.0
- This course is applicable for 1.0 hours toward the PDH requirement for engineers through the South Carolina Board of Registration for Professional Engineers.*
*Please check the rules and requirements in your state for compliance.
- SD ENG
- This course is applicable for professional development hours for engineers in South Dakota.*
*Please check the rules and requirements in your state for compliance.
- TN ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- TX ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- UT ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- VA ENG 1.0
- This program is applicable for 1.0 hours of continuing education through the Board for Architects, Professional Engineers, Land Surveyors, Certified Interior Designers and Landscape Architects (APELSCIDLA BOARD).*
*Please check the rules and requirements in your state for compliance.
- VT ENG
- This course is applicable for professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
- WI ENG 1.0
- This course is applicable for a maximum of 1.0 hours toward the PDH requirement for engineers.*
*The Wisconsin Engineer Section has final authority on the acceptance of individual courses and providers.
- WV ENG 1.0
- This course is applicable for 1.0 professional development hours for engineers.*
*Please check the rules and requirements in your state for compliance.
This program does NOT qualify, nor meet the National Standard for NASBA accreditation.
OnDemand Course
This course was last revised on August 7, 2019.
Call 1-866-352-9540 for further credit information.
No Credit AvailableThis program does NOT qualify, nor meet the National Standard for NASBA accreditation.
Who should attend?
This live webinar is designed for engineers, presidents, vice presidents, business owners and managers, project managers, environmental professionals, public works and utilities directors, developers, planners, contractors, and architects.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Faculty
George James Donnelly
George Donnelly Testing and Inspections
- Principal at George Donnelly Testing and Inspections
- Business focus is on concrete dryness testing and floor covering system failure analysis
- Conducts regular seminars dealing with concrete moisture emission and its effect on floor covering systems
- Author, co-author of related articles ‘When 3 Pounds is not 3 Pounds’, ‘Concrete In-situ Relative Humidity Testing, Friend or Foe’, ‘Burnished Concrete and Floor Covering Installation’
- Member ASTM committee E.06 on Building Standards, F.06 on Resilient Floors, ACI associate member committee 302, ICRI
- Can be contacted at (501) 915-0626 or [email protected]
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
All of your training, right here at Lorman.
Pay once and get a full year of unlimited training in any format, any time!
- OnDemand Courses
- Live Webinars
- MP3 Downloads
- Course Manuals
- Executive Reports
- White Papers and Articles
Additional benefits include:
- State Specific Credit Tracker
- All-Access Pass Course Concierge
Questions? Call 877-296-2169 to speak with a real person.
Access to all training products for one year
$699/year
Unlimited Lorman Training
With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!
Easy Registrations
Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.
Invest in Yourself
You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.
