Gain a better understanding of Lockout-Tagout regulatory and training requirements, and best practices to prevent injuries and fatalities.
Fatalities and serious injuries occur commonly in both construction and general industry workplaces, arising from failure to lockout/tagout (LOTO) properly when performing repairs and maintenance work. OSHA has enforced its general industry LOTO Standard (29 CFR 1910.147) aggressively, and it was the sixth most cited standard in FY 2023. Hazards include not only electrocution, but also crushing injuries if hydraulic or other stored energy is not addressed before work commences. The requirements are arduous and entail documented training, unique PPE and protocols, and have differing mandates depending upon which sector is involved. Moreover, complex OSHA policies like the Minor Servicing Exemption can complicate the determination of when LOTO is required in manufacturing and other settings. OSHA also can cite both the host employer and any onsite contractors where employees are exposed to unmitigated LOTO hazards, with penalties of up to $161K (OSHA) per exposed employee under the agency's 'IBI' enforcement policy. This session will provide the most current guidance from OSHA, basic regulatory and training requirements, and best practices to prevent injuries and fatalities, and to avoid costly citations.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Agenda
Overview
- OSHA's Lockout-Tagout Rules for General Industry
- OSHA's Loto Rules for Construction
Most Cited Provisions and Compliance Challenges
Scope of Rule: Which Employers and Which Employees
Loto Training
- Authorized Employee Training
- Affected Employee Training
Examining Loto Policies
OSHA Rulemaking Activities Impacting Loto Standards
Best Practices for Loto Safety
Conclusion
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Credits
OnDemand Course
This course was last revised on August 13, 2024.
Call 1-866-352-9540 for further credit information.
- BCSP
- This course is applicable to safety professionals. Professionals interested in credit through the Board of Certified Safety Professionals (BCSP), please contact the board at 1-317-593-4800, or you can access the Recertification Guide here: https://online.fliphtml5.com/pbcyp/eprz/
- AR CLE 1.0
- This course has been approved for 1.0 hours of CLE by the Arkansas CLE Board.
- Arizona CLE 1.0
- The Arizona State Bar does not pre-approve or pre-certify MCLE programs. However, records of this program and attendance will be maintained by Lorman Education Services for auditing purposes. This activity may qualify for up to 1.0 hours toward your annual CLE requirement for the State Bar of Arizona.
- CA MCLE 1.0
- Lorman Business Center, LLC. is a State Bar of California approved MCLE sponsor and this course qualifies for 1.0 CLE hours of participatory credit.
- CT CLE 1.0
- Neither the Connecticut Judicial Branch nor the Commission on Minimum Continuing Legal Education approve or accredit CLE providers or activities. This course has been approved for CLE credit in jurisdictions aside from CT and therefore it automatically meets the content and delivery requirements in Connecticut. Credit is based on a 60 minute credit hour and shall be awarded as follows: 1.0 CLE credit(s).
- GA CLE 1.0
- This program has been approved by the Georgia Commission on Continuing Lawyer Competency for 1.0 CLE hours.
- HI CLE 1.0
- This program was approved by the Hawaii State Board of Continuing Legal Education for 1.0 CLE credit hours.
- MO CLE 1.4
- This course qualifies for self-study CLE credit in Missouri.
- NH MCLE 1.1
- NH MCLE does not approve or accredit CLE activities for the NH Minimum CLE requirement. Lorman Education Services believes this Ondemand course meets the requirement of NH Supreme Court Rule 53 and may qualify for CLE credit(s). Program Length: 66 Minutes.
- NJ CLE 1.3
- This program has been approved by the Board on Continuing Legal Education of the Supreme Court of New Jersey for 1.3 hours of total CLE credit.
- PA CLE 1.0
- This Distance Learning program has been approved by the Pennsylvania Continuing Legal Education Board for 1.0 hours of substantive law, practice and procedure CLE credit.
- RI CLE 1.0
- This program has been approved by the Rhode Island Mandatory Continuing Legal Education Commission for 1.0 hours of CLE credit.
- WI CLE 1.0
- This program qualifies for 1.0 hour(s) of ondemand CLE through the WI Board of Bar Examiners.
- WV MCLE 1.4
- This program has been approved by the West Virginia State Bar MCLE Commission for 1.4 MCLE hours.
SHRM 1.0
- Lorman Education Services is recognized by SHRM to offer Professional Development Credits (PDCs) for the SHRM-CPSM or SHRM-SCPSM. This program is valid for 1.0 PDC(s) for the SHRM-CP or SHRM-SCP.
To earn each credit Lorman offers through the OnDemand learning platform, you need to watch 100% of the program. Also, for certain credits you will need to fulfill additional requirements which will be displayed on the "credits" tab when viewing the course.
This program does NOT qualify, nor meet the National Standard for NASBA accreditation.
MP3 Download
- Arizona CLE 1.0
- CA MCLE 1.0
- CT CLE 1.0
- HI CLE 1.0
- NJ CLE 1.3
- VT CLE 1.0
- WV MCLE 1.3
This program does NOT qualify, nor meet the National Standard for NASBA accreditation.
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
Faculty
Adele L. Abrams, Esq., ASP, CMSP
Law Office of Adele L. Abrams P.C.
- President, Law Office of Adele L. Abrams P.C.
- Practice representing employers in OSHA, MSHA and other regulatory and employment law matters.
- Instructs on employment law at U. of Colorado and Catholic University of America; regular speaker at conferences of NSC, ASSP, and various trade and bar associations.
- Co-author of textbooks: The Safety Professional’s Handbook and Con-struction Safety Management & Engineering (both published by ASSP)
- Member of NSC, ASSP, American Bar Association
- Avetta Fellow
- National Safety Council’s DSSA Award Winner 2017
- Admitted to practice before multiple state bars, federal courts and the U.S. Supreme Court
- JD, George Washington University; BS, University of Maryland, College Park.
- Can be contacted at [email protected] or 301-613-7498
Add to Wishlist
Credit
More Program Information
Why Lorman?
Over 37 years and 1.4 million customers worth of experience providing continuing education. Our passion is providing you world-class training to help you succeed in business and as a professional.
All of your training, right here at Lorman.
Pay once and get a full year of unlimited training in any format, any time!
- OnDemand Courses
- Live Webinars
- MP3 Downloads
- Course Manuals
- Executive Reports
- White Papers and Articles
Additional benefits include:
- State Specific Credit Tracker
- All-Access Pass Course Concierge
Questions? Call 877-296-2169 to speak with a real person.
Access to all training products for one year
$699/year
Unlimited Lorman Training
With the All-Access Pass there is no guessing what you will need for your yearly training budget. $699 will cover all of your training needs for an entire year!
Easy Registrations
Once you purchase your All-Access Pass you will never be any further than one-click away from attending any Lorman training course.
Invest in Yourself
You haven't gotten to where you are professionally by luck alone; it's taken a lot of hard work and training. Invest in yourself with the All-Access Pass.
